Peripheral equipment

Sheath sleeve

Ref : RH

The sheath sleeve is used to guide and orientate the various sheaths from the reels to the spinning machine.

The installation of a duct sheath consists of a cable tray, made up of hangers fixed to the ground, and duct sheaths. An installation may consist of one to several dozen ducts, depending on the project.

For optimum wiring, the ducts must comply with certain installation criteria. The ducts must be placed at a certain height, at a certain distance from the machine. Slopes and curve radii must also be rigorously defined.

To reduce the amount of space taken up by sleeves in the workshop, we can run them under tables or behind shelves. This solution optimises space and depends on both the configuration of your workshop and your requirements.

Mecaspin will design and install the ducts on site.

Equipment available in our packs:

Would you like similar equipment ?

Contact us

Sheaths for ICTA ducts - Mecaspin peripheral equipment

Technical specifications

Sheath - Mecaspin wiring installation equipment

Tubular sheath for duct

The installation of sheaths creates a system of conduits linking reels and pneumatic brake cables to the spinning unit. It ensures optimum unwinding of ducts when spinning over long distances. An installation of this kind can comprise up to ten ducts, depending on the project. The installation criteria are strict to guarantee optimal wiring, and the Mecaspin teams ensure that they are respected. The sleeves must be positioned at a specific height above the ground and at a precise distance from the machine. To make the most of the space available, the sheaths can be positioned under tables or behind shelves, depending on the layout of the workshop and the installation plan.

Diamètre de gaine supporté	Tous
Nombre de chemin de gaines	1 à 15
Longueur de fourreaux	20 à 70 m
Hauteur de chemin de gaines	950 mm
Distance sortie Fourreaux - Machine	800 mm
Longueur avant pente	1200 mm

Our compatible machines

with conduit sheath

semi-automatic pre-spinning MS01

See this machine

Pre-wiring
machine MS02

See this machine

industrial sheath pre-wiring machine ms03

Automatic pre-wiring MS03

See this machine

Industrial pre-wiring MS04

See this machine

Mecaspin, your partner for the manufacture of home automation, hydraulic and electrical octopuses wiring

Download the brochure

Our peripheral equipment

Increase productivity and improve the performance of your production line with Mecaspin peripheral equipment.

Gantry wire feeder - Mecaspin peripheral equipment

Unwinding gantry

Reel unwinder on castors - Mecaspin peripheral equipment

Trolley for unwinding drums

ICTA sheath reel

Brake distributor

Duct pusher for duct prefabrication machines - Mecaspin peripheral equipment

ICTA sheath pusher

ICTA duct riser - Mecaspin peripheral equipment

Sheath extension

Label printers for ICTA ducts - Mecaspin peripheral equipment

Zebra Printer

Air compressor

Would you like to find out more?

We invite you to our showroom

Come visit our showroom and test our pre-assembled wiring under real conditions, as well as our various peripheral equipment, accompanied by one of our technicians.

16 Rue des Artisans, 85220 L'Aiguillon-sur-Vie

From Monday to Friday from 8:30 am to 6:00 pm

RESERVE BY PHONE +33 2 52 56 25 17