All you need to know about the sheath pre-wiring

How long does it take to pre-thread a liner using an industrial pre-wiring machine?

The time it takes to pre-wire a liner depends on many factors, such as the type of liner, the size of the liner and the materials from which it is made. These factors can increase or decrease the pre-wiring time of a liner. However, standard ducts can be pre-wired in less than two minutes, or up to an hour depending on the specificity of your duct.

What are the main features of an industrial sheath pre-wiring ?

– The sheath pre-wiring can handle sheaths with an external diameter of up to 2.5 cm. – A reliable pre-filter made from robust materials, Made in France, a motor with variable speed drive for greater precision. Easy-to-use screens and programming functions for fast, efficient operation. – An automated machine, with increased output and greater precision in pipe preparation and installation. All these features concern Mecaspin sheath pre-wiring only!

What are the advantages of using a sheath pre-wiring ?

There are many advantages to using a sheath pre-wiring to prethread sheaths. The main ones are: -Saving time on a daily basis at . Shorter pre-filming time means higher productivity and more time for other operations. Greater precision when cutting your ducts: duct pre-wiring cut much more precisely than a human operator. The cut sheath is generally of higher quality and easier to process. – Improved flexibility: A more versatile manufacturing process that allows you to adapt to different types of sheath and cable. – Save money and reduce waste: given the efficiency and precision of an industrial pre-wiring, production costs are reduced. With better use of materials, there is less waste and use of raw materials and therefore more profit. A sheath pre-wiring brings massive savings on all aspects of manufacturing costs and use of raw materials. – Guaranteed safety: Duct pre-wiring have a wide range of options to guarantee your safety. Automatically closing bonnet, end-of-shaft detection, everything is in place to prevent accidents. Mecaspin installations are also designed and optimized to avoid any risk of RSI (Touch screen, label pre-gluing, etc.)

Is the sheath pre-wiring flexible?

The Mecaspin liner pre-wiring is designed to be flexible and adaptable to different liner diameters. The pre-wiring adapts to different duct diameters by adjusting the motor and an adjustment system. Our Mecaspin machines are also equipped with options for adjusting their speed and air flow to suit your different duct types and diameters.

Is it possible to adjust the speed of a sheath pre-wiring ?

All our models are equipped with a speed variation system that allows the speed to be set at different levels. Speed can be controlled by a display or other electronic control system. Adjusting the speed of a sheath pre-wiring is a key feature of Mecaspin machines.

What is the maximum length of a liner pre-spinning with a pre-wiring machine?

The maximum length of a pre-wired duct depends on the capacity of the machine and its size. Mecaspin machines can pre-wire a duct over two metres long. The width can vary depending on the machine, but can be up to 50 cm.

What are the most common parts to replace on a sheath pre-wiring ?

The most frequently replaced components are lubricants, blades, bearings, belts and seals. It is advisable to carry out regular maintenance on your machines and especially on some of its equipment. Mecaspin can provide you with regular maintenance rounds and can also supply you with important parts in less than a week.

Are duct pre-wiring easy to use ?

Mecaspin sheath pre-wiring are easy to use, and enable your employees to work quickly and efficiently. The machine’s software is designed for all users, from the most experienced to beginners. What’s more, our teams can train your employees to use the entire machine in less than a day.

What peripheral equipment is of interest for a sheath pre-wiring ?

So-called accessories, or peripheral equipment, are essential components of a sheath pre-wiring. They enable you to improve your manufacturing process and increase your productivity. There are different types of accessory that can be found with a sheath pre-wiring. Firstly, there are the unwinders/unloaders, the layout accessories and the packaging accessories.

Unwinding and unwinding equipment:

This equipment ensures that your ducts run smoothly and are stored correctly. They allow you to optimise your workshop and organise it in a better way. They also save a considerable amount of time when you’re putting your ducts away.

Workshop accessories :

These are accessories that will greatly improve life in your workshop or on your worksites. Workbenches, carts, servants helpyou organize your workshop and make your day-to-day work much easier. Here again, the aim is to save time on your tasks, but also to optimise your workshop and the space within it.

Packaging equipment

Packaging equipment, as the name suggests, is used to package your tubing. The tying machine, for example, makes tying tubing quick and easy. The aim is the same as for the other accessories, to help you optimise your production around your sheath pre-wiring.

Finally:

The sheath pre-wiring can therefore be seen as a machine that can radically increase your production capacity. Whether in terms of speed, precision or reliability, a pre-wiring offers you a long list of advantages. Mecaspin’s teams will be happy to answer any questions you may have about their industrial sheath pre-wiring !